Side Mounted Level Switch

Product Details:

Dual Magnet Horizontal Mounting Float Switch work on the principle ofmagnetic repulsion and therefore they are glandlessand leak proof instruments. A permanent magnet fittedin the tail piece of the float repels another magnetinside the switch housing which in turn operates anSPDT microswitch. Microswitch contacts can beutilized for initiating audio-visual signals or pumpcontrol.

Salient Features:

As our switches work on magnetic repulsion principle, they are glandless and leak proof.

No power consumption.

Internal assembly wirings are teflon insulated.

Internal switch assembly bracket is of cast aluminium.

Practically no maintenance is required except periodic cleaning.

Suitable for 2.5 (65 mm) NB nozzle mounting, (for 63 mm dia float) and 2  (51 MM) NB nozzle for 48 mm dia float.

Maximum working temperature 250 DegreeC. (Process Temperature)

Contact ratings of MICROSWITCH 5 AMPS at 230 VAC Resistive.

Also available with Microswitich having current rating 10 A at 230 VAC Resistive.

No of contacts 1 change over as standard. Optional - 2 change over

For high temperature upto 350 DegreeC (Process temperature)

1 number SPDT Reed switch with current rating 100 VA, max. switching current 5 Amps, max,

switching voltage 230 VAC / 200 VDC

Specific Gravity Down to 0.75

Caution:

Level Switches should not be used for direct starting / stopping of pumps. An external relay or contractor must always be used with the level switch.

MLS-04/MLS-16 side mounted level switches must always be mounted horizontally with outgoing cable entry facing downwards.

In case of high temperature Model MLS-04-92 HT/MLS-16-92HT and Low Temperature Models SMT-04-F82 and SMT-04-F92 arc suppressors/current limiting bias resistor must be provided depending on the load viz inductive or lamp load etc. to reduce the deteriorating effect of contacts due to surge voltages and high in-rush current.

Product Details:

Side mount Level Switch/Mini PP Level Switch :

A float switch is a device used to sense the level of liquid within a tank. When the float ball rises or falls with the liquid to the level of the switch, The magnetic force of magnet which inside of the float ball will cause the reed switch to turn ON. When the float ball move away from the reed switch, the reed switch will turn OFF.

Additional Information:

• Item Code: SideMountedLevelSwitch-PP

Product Details:

Blue Dual Magnet Horizontal Mounting Float Switch work on the principle of magnetic repulsion and therefore they are glandless and leak proof instruments. A permanent magnet fitted in the tail piece of the float repels another magnet inside the switch housing which in turn operates an SPDT microswitch. Microswitch contacts can be utilized for initiating audio-visual signals or pump control.

Note:

• Flanged connections as per ASA/BS/DIN or JIS available on request, as per customer requirement.

Additional Information:

• Item Code: MLS-16-F82-AC

Product Details:

Side Mounted Level Sitch

Product Details:

We are engaged in the manufacturing and exporting of world-class Products like Float Level Sensor for Security Alarm Systems, Reed Relays, Proximity Switches (Magnetic/ Inductive/ Photo Electric), Magnetic Float Switches and host of other Sensors for Security Alarm Systems.

Additional Information:

• Item Code: SMT16S

Product Details:

We offer Boiler Level Switch to our clients.

Product Details:

Avilable In Contact Form
SMT-PP -L-01 (Normally Open)
OR  
SMT-PP-L-02 (Normally Close)

Single Point Level Switch

Contact Rating, Max 10 W
Switching Voltage Max 100 VDC

Switching Current Max 0.5 Amp DC

Installation Side Mount
Wire length 1 meters
Material of Construction Housing PP & Float PP Foam

Product Details:

Miniature Side Mounted Level Switch
Model SMT-16M

Material of construction SS 316.

Float diameter 28mm.

Process connection ¼”BSP (M) thread with locknut. PTFE Teflon Gasket.

Mounting hole diameter-13mm.

Type of switch 1 No. SPST Reed switch.

Maximum switching voltage 230VAC

Maximum switching current 3 Amp.

Maximum working pressure 4 kg/sq.cm

Maximum working temperature 125 deg C.

Wire 1 Meter long Teflon Insulated flying extension leads.

Specific gravity 0.5

Additional Information:

• Item Code: SMT-16M

Product Details:

Model (SMT-16) side mounted miniature level switch.Material of construction-SS 316.Float diameter-48mm.Process connection-1/4" BSP(M) thread with locknut.PTFE Teflon gasket.Mounting Hole diameter-13mm.SPST Reedswitch rated 100 VA, maximum switching voltage-230 VAC/ 300 VDC,maximum switching current-3 Amp.With 1 Metre long 19/36 SWG Teflon insulated flying extension leads. Maximum working pressure- 4 kg/sq.cm & Temperature-125 deg C.Specific gravity-0.5

Additional Information:

• Item Code: SMT-16

Product Details:

Model SMT-04M

Material of construction Float SS 316 & Wetted Parts in SS 304.

Float diameter 28mm.

Process connection ¼”BSP (M) thread with locknut.

PTFE Teflon Gasket.

Mounting hole diameter-13mm.

Type of switch 1 No. SPST Reed switch.

Maximum switching voltage 230VAC

Maximum switching current 3 Amp.

Maximum working pressure 4 kg/sq.cm

Maximum working temperature 125 deg C.

Wire 1 Meter long 19/36 SWG Teflon Insulated.

Specific gravity 0.5

Product Details:

Top mounted level switches work on permanent magnet reed switch basis. The floats which contain permanent magnets move freely between their stops rising or falling with liquid level movement. Hermetically sealed within the tube are reed switches, completely isolated from the medium. The magnet's field actuates the reed switch as the float moves while the stoppers restrict overrun and prevent the reed switch returning to its original position.

Product Details:

We are offering MLS-16-F92-Ht.  Magnetic Level Switches to our clients.

Product Details:

• Reed-Switch actuated level switches work on the principle of magnetic flux linkage and therefore they are glandless and leak-proof instruments.
• No Power Consumption.
• Contacts are potential free, NO, NC or CO contacts can be provided.
• Practically no maintenance is required except periodic cleaning.
• As reed-switches are inside metallic tube-guide pipe, protected from mechanical damage.
• Reed switches have Rhodium contacts with low contact resistance.
• Wherever Low Voltages are available 24V or less Reed-Switch actuated level switches may be used directly, Otherwise it should be used in conjuction with our "Electronic control Unit". This ensures enhanced life of the level switch.
• Wide operating temperature range from-40deg.C to +125 deg.C. Optional Upto 175 deg C.
• Reed-Actuated level switches are ideal where vibration is involved.
• In a single level switch we offer a maximum of 5 level sensing.
• For highly viscous liquids heavy floats with teflon coated guide pipes are available.

Product Details:

PP Side Mount Water Level Sensor Liquid Float Switch (Externa Mount)

Can be used to sense the level of liquid in a tank.
Can activate a pump, an indicator, an alarm or other device.

Product Details:

Magnetic Level switches are widely used for measurement and control of almost any liquid level.User area include lubrication systems, hydraulic power packs, industrial washing & cleaningsystems. Ultrasonic cleaning equipments, machine tools, storage tanks, liquid dispensingsystems, over head and underground storage tanks, thermic fluid heaters, boilers etc.Potential free contacts provided in the level switch may be utilised to make or break an electricalcircuit indication of high and low levels, audible high/low level alarms, automatic pump control, toopen or close electrically operated valves, to cut-off or switch on heating elements.The Basic reed switch consists of two identical flattenedferromagnetic reeds, sealed in a dry inert-gas atmospherewithin a glass capsule as shown above. The reeds aresealed in the capsule in cantilever form so that their free endsoverlap and are separated by a small air gap. When amagnetic force is generated parallel to the reed switch, thereeds become flux carriers in the magnetic circuit. Theoverlapping ends of the reeds become opposite magneticpoles, which attract each other. If the magnetic force between the poles is strong enough to overcomethe restoring force of the reeds, the reeds will be drawn together when the magnetic force is withdrawnthe contact breaks.

Side-mounted level switch :A hermetically sealed-in-glass reed switch located insidethe stem is actuated by a magnet in the tailpiece of thefloat, when the float moves upward due to rise of liquidlevel. When the liquid level falls the float moves downward,the magnet moves away and the Reed Switch contactbreaks.
Salient Features  Reed-Switch actuated level switches work on the principle of magnetic flux linkage andtherefore they are glandless and leak-proof instruments No Power Consumption Contacts are potential free, NO, NC or CO contacts can be provided Practically no maintenance is required except periodic cleaning As reed-switches are inside metallic tube-guide pipe, protected from mechanical damage Reed switches have Rhodium contacts with low contact resistance Wherever Low Voltages are available 24V or less Reed-Switch actuated level switches may beused directly, Otherwise it should be used in conjuction with our "Electronic control Unit".This ensures enhanced life of the level switch Wide operating temperature range from-40deg.C to +125 deg.C. Optional Upto 175 deg C Reed-Actuated level switches are ideal where vibration is involved In a single level switch we offer a maximum of 5 level sensing For highly viscous liquids heavy floats with teflon coated guide pipes are available.

Product Details: